Home   About Contact Order Downloads Employment Opportunities
 
Dispensing Valves

Dispensing valves by Leland can reduce pressure output and flow.
They can also filter and meter gas to your requirements.
Devices shown with fitted with removable nozzles.
Many fittings and configurations can be accommodated.

 

Dispensing Valves
Item #
Item Name
View Inlet Size
Description
87100
PowerClean?
Generation X
Red Button Valve
50003 5/8”-18UNF Female** Can be reduced to 3/8”-24UNF female with bushing P/N 50037. Can be made with ?” thread on special run basis. Approved for use on manned space flight by NASA and often seen on the sets of major motion pictures, this valve is the ultimate in delicate particle removal when used with either our 52101 74g CO2 cylinders or our 88123 high pressure Nitrogen cylinders. Integral puncture pin with no gas loss upon puncturing, side lock button to prevent discharge while in gadget bag or tool box. The valve has very smooth feather touch control for very light gas dispensing through the two provided nozzles, one has tapper tip and the other is a straight bore for general use. The outlet pressure on this valve is very low, <300psi.
87000
PowerClean?
ProSeries
Green Button Valve
50011 5/8”-18UNF Female** Can be reduced to 3/8”-24UNF female with bushing P/N 50037. Can be made with ?” thread on special run basis. Integral puncture pin with no gas loss upon puncturing, side lock button to prevent discharge while in gadget bag or tool box. The valve has very smooth feather touch control for very light gas dispensing through the two provided nozzles, one has tapper tip and the other is a straight bore for general use. The outlet pressure on this valve is not controlled, only a restricted orifice slows the flow.
51000
Old School
PowerClean? Valve
3/8”-24

The last time we molded this valve was 1994 and that supply lasted us for 7 years. Leakage was a problem when the user kept the CO2 cartridge in the valve for more than a month.

NEW

New Dispense valve
beta testing
Uses non threaded 16g CO2 Although shown with a nozzle, this innovative valve will adapt to almost anything. We have been working on this for many years, it takes time to overcome performance vs. cost hurdles.

 

 Rev 14.0
 
 
Copyright ?014 All rights reserved.    The Leland logo is a registered trademark of Leland Limited Incorporated.    
breitling replica rolex replica sale rolex replica sale rolex replica sale panerai replica sale